Priority Queueing on Linux
There is priority queueing in Cisco router.
Is there any equivalent implementation for TC on Linux?
If yes, how can I configure and can you give me example? Thx.
Quoted 5 lines · Patrick Chan
There is priority queueing in Cisco router.
Is there any equivalent implementation for TC on Linux?
If yes, how can I configure and can you give me example?
Please dig up a link so we can see what 'priority queueing' actually *is*. But I bet that tc has it.
Regards,
bert
Signature · 6 lines
http://www.PowerDNS.com Versatile DNS Software & Services http://www.tk the dot in .tk http://lartc.org Linux Advanced Routing & Traffic Control HOWTO _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 10 lines · bert hubert
Quoted 3 lines · Patrick Chan
There is priority queueing in Cisco router.
Please dig up a link so we can see what 'priority queueing' actually *is*. But I bet that tc has it.
I can almost guarantee Patrick is asking about diffserv support.
Signature · 6 lines
Michael T. Babcock CTO, FibreSpeed Ltd. _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 5 lines · Michael T. Babcock
Quoted 3 lines · bert hubert
On Tue, Jul 09, 2002 at 12:02:40PM +0800, Patrick Chan wrote:
Quoted 8 lines
Quoted 7 lines
Quoted 2 lines
There is priority queueing in Cisco router.
Please dig up a link so we can see what 'priority queueing' actually *is*.
But I bet that tc has it.I can almost guarantee Patrick is asking about diffserv support.
nope, here it is.
http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121cgcr/qos_c/qcprt2/qcdconmg.htm#23965
Signature · 8 lines
Anton Yurchenko<[email protected]> Digital Generation _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
it is the same as PRIO queue in linux tc.
devik
Quoted 14 lines · bert hubert
Quoted 5 lines · Patrick Chan
There is priority queueing in Cisco router.
Is there any equivalent implementation for TC on Linux?
If yes, how can I configure and can you give me example?
Please dig up a link so we can see what 'priority queueing' actually *is*. But I bet that tc has it.
Regards,
bert
Quoted 9 lines
--
http://www.PowerDNS.com Versatile DNS Software & Services
http://www.tk the dot in .tk
http://lartc.org Linux Advanced Routing & Traffic Control HOWTO
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Hi,
Below is the explanation of priority queueing
http://www.cisco.com/univercd/cc/td/doc/cisintwk/ito_doc/qos.htm#xtocid22
I am developing a linux router.
There is both data and voice traffic passed thru it.
When I use priority queueing on Cisco router,
the voice quality is good, evening downloading a large file.
But I use the following tc config, the voice quality is not smooth when downloading a large file:
tc qdisc add dev ppp0 root handle 10: cbq bandwidth 112Kbit avpkt 1000 tc class add dev ppp0 parent 10:0 classid 10:100 cbq bandwidth 112Kbit rate 57Kb
it allot 1514 weight 5Kbit prio 2 maxburst 20 avpkt 1000 isolated tc class add dev ppp0 parent 10:0 classid 10:200 cbq bandwidth 112Kbit rate 55Kb
it allot 1514 weight 5Kbit prio 8 maxburst 20 avpkt 1000 bounded tc qdisc add dev ppp0 parent 10:100 sfq quantum 1514b perturb 15 tc qdisc add dev ppp0 parent 10:200 sfq quantum 1514b perturb 15 tc filter add dev ppp0 parent 10:0 protocol ip prio 2 u32 match ip tos 0x8 0xff
flowid 10:100
tc filter add dev ppp0 parent 10:0 protocol ip prio 8 u32 match ip tos 0x00 0xff
flowid 10:200
voice packet is tagged with 0x8 in TOS field.
Voice traffic only uses 34K bandwidth. So the bandwidth allocated to voice is enough.
Is there any better tc config?
----------------------------------------------------------------------------
----------------------
Date: Tue, 9 Jul 2002 11:46:58 +0200
From: bert hubert <[email protected]>
To: [email protected]
Subject: Re: [LARTC] Priority Queueing on Linux
Quoted 5 lines · Patrick Chan
There is priority queueing in Cisco router.
Is there any equivalent implementation for TC on Linux?
If yes, how can I configure and can you give me example?
Please dig up a link so we can see what 'priority queueing' actually *is*. But I bet that tc has it.
Regards,
bert
Signature · 9 lines
http://www.PowerDNS.com Versatile DNS Software & Services http://www.tk the dot in .tk http://lartc.org Linux Advanced Routing & Traffic Control HOWTO Date: Tue, 09 Jul 2002 09:19:11 -0400 From: "Michael T. Babcock" <[email protected]> Organization: FibreSpeed Ltd. To: lartc <[email protected]> Subject: Re: [LARTC] Priority Queueing on Linux
Quoted 10 lines · bert hubert
Quoted 3 lines · Patrick Chan
There is priority queueing in Cisco router.
Please dig up a link so we can see what 'priority queueing' actually *is*. But I bet that tc has it.
I can almost guarantee Patrick is asking about diffserv support.
Signature · 2 lines
Michael T. Babcock CTO, FibreSpeed Ltd.
Quoted 2 lines · Anton Yurchenko
nope, here it is.
http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121cgcr/qos_c/qcprt2/qcdconmg.htm#23965
From the page (for those who don't follow links, or for the archives of
this list):
PQ [Priority Queuing] allows you to define how traffic is prioritized in the network. You configure four traffic priorities. You can define a series of filters based on packet characteristics to cause the router to place traffic into these four queues; the queue with the highest priority is serviced first until it is empty, then the lower queues are serviced in sequence.
Signature · 7 lines
Michael T. Babcock CTO, FibreSpeed Ltd. _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
You can use the prio options in qdisc and channel traffic thro' different qdiscs. Another option is to set TOS marks and route to qdiscs using the mark filters in u32 classifier.
Why don't you look up http://www.docum.net . Staf has a good site going. I've benefitted from it.
Mohan
-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Patrick Chan
Sent: Tuesday, July 09, 2002 9:33 AM
To: [email protected]
Subject: [LARTC] Priority Queueing on Linux
There is priority queueing in Cisco router.
Is there any equivalent implementation for TC on Linux?
If yes, how can I configure and can you give me example? Thx.